elasticsearch节点的transport请求发送怎么处理
这篇文章主要介绍“elasticsearch节点的transport请求发送怎么处理”的相关知识，小编通过实际案例向大家展示操作过程，操作方法简单快捷，实用性强，希望这篇“elasticsearch节点的transport请求发送怎么处理”文章能帮助大家解决问题。
transport请求的发送和处理过程
前一篇分析对nettytransport的启动及连接，本篇主要分析transport请求的发送和处理过程。
cluster中各个节点之间需要相互发送很多信息，如master检测其它节点是否存在，node节点定期检测master节点是否存储，cluster状态的发布及搜索数据请求等等。为了保证信息传输，elasticsearch定义了一个19字节长度的信息头HEADER_SIZE = 2 + 4 + 8 + 1 + 4，以'E'，'S'开头，接着是4字节int信息长度，然后是8字节long型信息id，接着是一个字节的status，最后是4字节int型version。
所有的节点间的信息都是以这19个字节开始。同时elasticsearch对于节点间的所有action都定义 了名字，如对master的周期检测action，internal:discovery/zen/fd/master_ping，每个action对应着相应的messagehandler。接下来会进行详分析。
request的发送过程
代码在nettytransport中如下所示：
public void sendRequest(final DiscoveryNode node, final long requestId, final String action, final TransportRequest request, TransportRequestOptions options) throws IOException, TransportException {
//参数说明：node发送的目的节点，requestId请求id，action action名称，request请求，options包括以下几种操作 RECOVERY,BULK,REG,STATE,PING;
Channel targetChannel = nodeChannel(node, options);//获取对应节点的channel，channel在连接节点时初始化完成（请参考上一篇）
if (compress) {
options.withCompress(true);
}
byte status = 0;
//设置status 包括以下几种STATUS_REQRES = 1 << 0; STATUS_ERROR = 1 << 1; STATUS_COMPRESS = 1 << 2;
status = TransportStatus.setRequest(status);
ReleasableBytesStreamOutput bStream = new ReleasableBytesStreamOutput(bigArrays);//初始写出流
boolean addedReleaseListener = false;
try {
bStream.skip(NettyHeader.HEADER_SIZE);//留出message header的位置
StreamOutput stream = bStream;
// only compress if asked, and, the request is not bytes, since then only
// the header part is compressed, and the "body" can't be extracted as compressed
if (options.compress() && (!(request instanceof BytesTransportRequest))) {
status = TransportStatus.setCompress(status);
stream = CompressorFactory.defaultCompressor().streamOutput(stream);
}
stream = new HandlesStreamOutput(stream);
// we pick the smallest of the 2, to support both backward and forward compatibility
// note, this is the only place we need to do this, since from here on, we use the serialized version
// as the version to use also when the node receiving this request will send the response with
Version version = Version.smallest(this.version, node.version());
stream.setVersion(version);
stream.writeString(transportServiceAdapter.action(action, version));
ReleasableBytesReference bytes;
ChannelBuffer buffer;
// it might be nice to somehow generalize this optimization, maybe a smart "paged" bytes output
// that create paged channel buffers, but its tricky to know when to do it (where this option is
// more explicit).
if (request instanceof BytesTransportRequest) {
BytesTransportRequest bRequest = (BytesTransportRequest) request;
assert node.version().equals(bRequest.version());
bRequest.writeThin(stream);
stream.close();
bytes = bStream.bytes();
ChannelBuffer headerBuffer = bytes.toChannelBuffer();
ChannelBuffer contentBuffer = bRequest.bytes().toChannelBuffer();
buffer = ChannelBuffers.wrappedBuffer(NettyUtils.DEFAULT_GATHERING, headerBuffer, contentBuffer);
} else {
request.writeTo(stream);
stream.close();
bytes = bStream.bytes();
buffer = bytes.toChannelBuffer();
}
NettyHeader.writeHeader(buffer, requestId, status, version);//写信息头
ChannelFuture future = targetChannel.write(buffer);//写buffer同时获取future，发送信息发生在这里
ReleaseChannelFutureListener listener = new ReleaseChannelFutureListener(bytes);
future.addListener(listener);//添加listener
addedReleaseListener = true;
transportServiceAdapter.onRequestSent(node, requestId, action, request, options);
} finally {
if (!addedReleaseListener) {
Releasables.close(bStream.bytes());
}
}
}以上就是request的发送过程，获取目标node的channel封装请求写入信息头，然后发送并使用listener监听，这里transportRequest是一个抽象类，它继承了TransportMessage同时实现了streamable接口。cluster中对它的实现非常多，各个功能都有相应的request，这里就不一一列举，后面的代码分析中会时常涉及。
request的接受过程
request发送只是transport的一部分功能，有发送就要有接收，这样transport的功能才完整。接下来就是对接收过程的分析。上一篇中简单介绍过netty的使用，message的处理是通过MessageHandler处理，因此nettyTransport的信息处理逻辑都在MessageChannelHandler的messageReceived（）方法中，代码如下所示：
public void messageReceived(ChannelHandlerContext ctx, MessageEvent e) throws Exception {
Transports.assertTransportThread();
Object m = e.getMessage();
if (!(m instanceof ChannelBuffer)) {//非buffer之间返回
ctx.sendUpstream(e);
return;
}
//解析message头
ChannelBuffer buffer = (ChannelBuffer) m;
int size = buffer.getInt(buffer.readerIndex() - 4);
transportServiceAdapter.received(size + 6);
// we have additional bytes to read, outside of the header
boolean hasMessageBytesToRead = (size - (NettyHeader.HEADER_SIZE - 6)) != 0;
int markedReaderIndex = buffer.readerIndex();
int expectedIndexReader = markedReaderIndex + size;
// netty always copies a buffer, either in NioWorker in its read handler, where it copies to a fresh
// buffer, or in the cumlation buffer, which is cleaned each time
StreamInput streamIn = ChannelBufferStreamInputFactory.create(buffer, size);
//读取信息头中的几个重要元数据
long requestId = buffer.readLong();
byte status = buffer.readByte();
Version version = Version.fromId(buffer.readInt());
StreamInput wrappedStream;
…………
if (TransportStatus.isRequest(status)) {//处理请求
String action = handleRequest(ctx.getChannel(), wrappedStream, requestId, version);
if (buffer.readerIndex() != expectedIndexReader) {
if (buffer.readerIndex() < expectedIndexReader) {
logger.warn("Message not fully read (request) for [{}] and action [{}], resetting", requestId, action);
} else {
logger.warn("Message read past expected size (request) for [{}] and action [{}], resetting", requestId, action);
}
buffer.readerIndex(expectedIndexReader);
}
} else {//处理响应
TransportResponseHandler handler = transportServiceAdapter.onResponseReceived(requestId);
// ignore if its null, the adapter logs it
if (handler != null) {
if (TransportStatus.isError(status)) {
handlerResponseError(wrappedStream, handler);
} else {
handleResponse(ctx.getChannel(), wrappedStream, handler);
}
} else {
// if its null, skip those bytes
buffer.readerIndex(markedReaderIndex + size);
}
…………
wrappedStream.close();
}以上就是信息处理逻辑，这个方法基础自netty的SimpleChannelUpstreamHandler类。作为MessageHandler会在client和server启动时加入到handler链中，在信息到达后netty会自动调用handler链依次处理。这是netty的内容，就不详细说明，请参考netty文档。
request和response是如何被处理
request的处理
代码如下所示：
protected String handleRequest(Channel channel, StreamInput buffer, long requestId, Version version) throws IOException {
final String action = buffer.readString();//读出action的名字
transportServiceAdapter.onRequestReceived(requestId, action);
final NettyTransportChannel transportChannel = new NettyTransportChannel(transport, transportServiceAdapter, action, channel, requestId, version, profileName);
try {
final TransportRequestHandler handler = transportServiceAdapter.handler(action, version);//获取处理该信息的handler
if (handler == null) {
throw new ActionNotFoundTransportException(action);
}
final TransportRequest request = handler.newInstance();
request.remoteAddress(new InetSocketTransportAddress((InetSocketAddress) channel.getRemoteAddress()));
request.readFrom(buffer);
if (handler.executor() == ThreadPool.Names.SAME) {
//noinspection unchecked
handler.messageReceived(request, transportChannel);//使用该handler处理信息。
} else {
threadPool.executor(handler.executor()).execute(new RequestHandler(handler, request, transportChannel, action));
}
} catch (Throwable e) {
try {
transportChannel.sendResponse(e);
} catch (IOException e1) {
logger.warn("Failed to send error message back to client for action [" + action + "]", e);
logger.warn("Actual Exception", e1);
}
}
return action;
}几个关键部分在代码中进行了标注。这里仍旧不能看到请求是如何处理的。因为cluster中的请求各种各样，如ping,discovery，index等等，因此不可能使用同一种处理方式。因此request最终又被提交给handler处理。每个功能请求都实现了自己的handler，当请求被提交给handler时会做对应的处理。这里再说一下transportServiceAdapter，消息的处理都是通过它适配转发完成。request的完整处理流程是：messageReceived（）方法收到信息判断是request会将其转发到transportServiceAdapter的handler方法，handler方法查找对应的requesthandler，使用将信息转发给该handler进行处理。这里就不举例说明，在后面的discover分析中我们会看到发现，ping等请求的处理过程。
response的处理过程
response通过handleResponse方法进行处理，代码如下：
protected void handleResponse(Channel channel, StreamInput buffer, final TransportResponseHandler handler) {
final TransportResponse response = handler.newInstance();
response.remoteAddress(new InetSocketTransportAddress((InetSocketAddress) channel.getRemoteAddress()));
response.remoteAddress();
try {
response.readFrom(buffer);
} catch (Throwable e) {
handleException(handler, new TransportSerializationException("Failed to deserialize response of type [" + response.getClass().getName() + "]", e));
return;
}
try {
if (handler.executor() == ThreadPool.Names.SAME) {
//noinspection unchecked
handler.handleResponse(response);//转发给对应的handler
} else {
threadPool.executor(handler.executor()).execute(new ResponseHandler(handler, response));
}
} catch (Throwable e) {
handleException(handler, new ResponseHandlerFailureTransportException(e));
}
}response的处理过程跟request很类似。每个request都会对应一个handler和一个response的处理handler，会在时候的时候注册到transportService中。请求到达时根据action名称获取到handler处理request，根据requestId获取对应的response handler进行响应。
关于“elasticsearch节点的transport请求发送怎么处理”的内容就介绍到这里了，感谢大家的阅读。如果想了解更多行业相关的知识，可以关注蜗牛博客行业资讯频道，小编每天都会为大家更新不同的知识点。
免责声明：本站发布的内容（图片、视频和文字）以原创、转载和分享为主，文章观点不代表本网站立场，如果涉及侵权请联系站长邮箱：niceseo99@gmail.com进行举报，并提供相关证据，一经查实，将立刻删除涉嫌侵权内容。
评论